Product Appearance
Product Dimension
Function Instroduction
1. Channel indicator: Red LED
2. Band indicator: Blue LED
3. Power indicator: Green LED
4. Band & Channel changer button
5. Power changer button
6. 1.0 6P Power connector
7. MMCX Antenna Connector
Control Method and LED Indicator
1. Key ④ is the frequency channel & band selection key. Press key ④ for a short period of time will switch to the next frequency channel. Depends on the frequency plan or band we are using, the corresponding red LED ① (band A) or blue LED ② (band B) will flash 1, 2,3,4,5,6,7 or 8 times for channel no. indication. Press key ④ for a period longer than 3S will switch to another channel frequency plan or band. For example, if now we are in channel no. 3 of band A, the red LED ① will flash 3 times. If we press key④ for more than 3S and release, the red LED ① will be turned off and blue LED ② will flash 3 times which means we are now in channel NO. 3 of band B. Frequency channel or band selection is cyclic.
| Short press button ④ to switch channel | ||||||||
| Red LED | CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 |
| Flash once | Flash twice | Flash for 3 times | Flash for 4 times | Flash for 5 times | Flash for 6 time | Flash for 7 times | Flash for 8 times | |
2. Key ⑤ is the Tx power ON/OFF control key. Press it for a short period of time to turn the output power ON or OFF. If the key is pressed and held for 3 seconds, the module will enter pit mode and all the LEDs will be turned on simultaneously.
| 1. Short press key ⑤ to toggle the output power ON/OFF.
2. Long press the key to enter Pit mode |
||
| Tx output power ON | Tx output power OFF | Pit mode |
| Green LED ③ is turned on | Green LED ③ is turned off | All 3 LEDs will be turned on simultaneously |
Table of Corresponding Channel Frequency Parameters
| Channel Frequency Table (in MHz) | ||||||||
| Channel | CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 |
| Band A | 3320 | 3345 | 3370 | 3395 | 3420 | 3445 | 3470 | 3495 |
| Band B | 3310 | 3330 | 3355 | 3380 | 3405 | 3430 | 3455 | 3480 |
Illustrate of 6P 1.0 Wiring
Wiring Table
| NO. | 1 | 2 | 3 | 4 | 5 | 6 |
| FUN | 6-36V | GND | Video | IRC | 5V out | GND |
| Color | Red | Black | Yellow | White | Red | Black |
Notice for Use
1. A certain space shall be reserved when the transmitter is installed to ensure the air convection around the module and module cooling; otherwise, if the overheating protection of the module is started, the power emission will be lowered and even closed.
2. We suggested to ensure correct voltage scope and correct positive and negative anodes before powering-on to avoid element burning-out.
3. We suggested to confirm antenna has been installed at the RF output terminal before powering-on to extend the service life of transmitter.
4. Please read the Instruction before use to ensure correct wiring and extend the service life of transmitter.
Legal Disclaimer
Important Notice on Radio Frequency Usage
1.DMKR high-performance VTX modules (3W-7W) are powerful RF instruments.Designed for specialized industrial, research, and laboratory applications. By purchasing this product, the buyer acknowledges and agrees to the following:
2.Regulatory Compliance: It is the buyer’s sole responsibility to ensure that the operation of this device complies with local laws, radio frequency regulations, and licensing requirements in their respective country or region.
3.Professional Use Only: This equipment should only be operated by qualified professionals. DMKR is not liable for any legal consequences, fines, or damages resulting from illegal or improper use.
4.Frequency Licensing: The 7.2GHz band may be restricted or require a specific technician’s license for operation. Please consult your local telecommunications authority (e.g., FCC, OFCOM, BNetzA) before powering on the device.
5.Risk of Misuse: The user assumes all risks associated with the deployment of this hardware. DMKR does not authorize the use of these devices in prohibited areas, including but not limited to, near airports or restricted government airspace.
6.No Liability: In no event shall DMKR be held liable for any direct, indirect, or incidental damages, including hardware failure of the UAV/UGV or legal intervention, arising out of the use or inability to use this product.
7.Safety Warning: High-power RF devices generate significant heat and radiation. Ensure proper thermal management and maintain a safe distance during operation.
8.Hardware Modification: Unauthorized modification of the firmware or hardware may void compliance certifications and safety protections.
Reviews
There are no reviews yet.